![[ProjectSTi]](https://blogger.googleusercontent.com/img/a/AVvXsEgqVanZg9w-c4hS30-vwmY1vqbhTqkAlpb0a2RMSq9lGDlNvjWa6PF_M3Dcb_y6Lzef4wChPlx3cJivdW2n8v3tjZ8PrUJzH4D7Ktx4Jhzz0H0hrUmEXP80ofkZt9y5xM1irMQWm787FTXxzia9UsFrNI3MwfiwgLlTpAO-55uip-USRGdOW4WYicZieO0=s174)
So I purchased a Formula KS-4 knock monitor, the idea is mount it on the dash, then run a 5volt signal to the ecu direct. I can then setup the ecu so that if it detects a knock signal it can either kill the power and prevent detonation.
It will also be helpful for data logging as well and I plan to add another 0.2 BAR Boost pressure and get the car back up to in excess of 450BHP minimum.
Im planning on running a dyne day with my local drivers club, so it will be great to get the car on the rollers and see what the engine produces at the wheels!
It will also be helpful for data logging as well and I plan to add another 0.2 BAR Boost pressure and get the car back up to in excess of 450BHP minimum.
Im planning on running a dyne day with my local drivers club, so it will be great to get the car on the rollers and see what the engine produces at the wheels!
Comments
Post a Comment